Tl-audio A4 Manuel d'utilisateur télécharger pdf (Page 5)

A correctly designed balanced interface should have both phase and non-phase signals

of equal magnitude (and source impedance), but should allow either of the phase and

non-phase signals to be connected to an arbitrary electrical point (e.g. ground) without

changing the differential level. Therefore, if, for instance, the non-phase signal is

shorted to ground by an unbalanced input on a piece of equipment, then the phase

signal should double in magnitude to compensate. Such an arrangement is referred to

as “floating” or “ground-free”. Balanced signals require 3 pin connectors, such as

XLR’s or TRS jack plugs, carrying the phase and non-phase signals, plus a screening

ground connection.

Naturally, the Ebony Series features balanced, ground-free signals for all line inputs

and outputs, as well as insertion points where present. The range is also compatible

with unbalanced equipment, as described above.

Please read this manual fully before installing or operating the Processor.

1 2 3 4 5 6 7 8 9 10 ... 14 15

Pas de commentaire

Tl-audio A4 Manuel d'utilisateur Page 5